Skip to product information
1 of 7

LED Light Therapy by Al+ Cosmetics

LumiTech+ Advanced LED Light Therapy Mask

LumiTech+ Advanced LED Light Therapy Mask

| 4 wavelengths | 240 individual LEDs | Medical grade silicone | Adjustable energy | Safe for home use |

LumiTech+ Advanced is a high-tech LED facial mask designed for effective home therapy with clinically proven results. Made of soft, medical-grade silicone, this lightweight and form-fitting mask envelops the skin with 240 independent diodes that emit pure light in 4 wavelengths – red (630nm), blue (460nm), yellow (590nm) and near infrared (NIR 850nm).

Key features:

  • Stimulates collagen production
  • Soothes inflammation and acne
  • Brightens and evens out the complexion
  • Tightens skin and reduces fine lines

Designed with a flexible body, adjustable strap and remote control, LumiTech+ offers professional LED therapy without the need for a clinic visit.

  • Dermatologist Approved
  • Advanced Anti-Age
  • ROHS & CE Certified

Изберете вариант

In stock

🔥 В момента ... потребителя разглеждат този продукт
LumiTech+ LED Ultimate Therapy Pack
24% OFF
Купете LED Light Ultimate Therapy Pack и спестете!

$549.00 / 280.70 € $418.00 / 213.72 €
Виж рутината

How does it work?

  • 240 individual LEDs (for cleaner and more concentrated light)

  • 3 light energy levels (low, medium, high)

  • Timer for 10, 15, 20, 25 or 30 minutes

  • Nearly 1 hour of operation on a single charge

  • Independent infrared light control (on/off as desired)

With LumiTech+ Advanced, you will benefit from 240 high-quality LEDs, divided into 60 blocks, each with 4 LEDs, which emit light with different wavelengths (red, blue, yellow and infrared). Red light stimulates the production of collagen and elastin, blue light is effective against acne, yellow light improves complexion, and infrared light penetrates deep into the skin, stimulating cell renewal.

How to use?

  1. Remove the mask and clean it.
  2. Cleanse your face and pat dry.
  3. Start with a sensitivity test to check how your skin reacts to the mask.
  4. Put on the mask and adjust the elastic around your head. Turn on the mask and relax for 10 minutes. The mask will turn off automatically.

Expert Tip: Use 3 to 5 times a week as part of your morning or evening skincare routine. For an instant boost of hydration and radiance, combine with our hydrating cream or serum.

Sensitivity test

Before starting your first treatment, you should do the sensitivity test. Follow the step-by-step guide below:

  1. Turn on the device.
  2. Turn on the controller and let the device run for its full 10-minute treatment program. The device will automatically shut off after 10 minutes.
  3. If at any time you feel your skin becoming hot or uncomfortable, stop using the device immediately.
  4. After treatment, wait at least 6 hours. If your skin becomes red and/or itchy, the device is not suitable for you. In these cases, you can return the device within 14 days for a full refund.

Lights and treatment

🔴 Red light 630nm - Stimulates collagen, improves elasticity, reduces wrinkles

🔵 Blue light 460nm - Destroys bacteria, helps with acne and inflammation

🟡 Yellow light 590nm - Lightens pigmentation, soothes sensitive skin

NIR Near Infrared Light 850nm - Penetrates deep layers, accelerates regeneration

*Near infrared light is invisible to the human eye and when activated, the 4th diode in each block will emit NIR, but to the human eye it will appear as if it is not turned on.

Light intensity (irradiance): This mask has 4 different light colors, with 3 levels of intensity adjustment, and the infrared light can be turned on separately. The light intensity of the mask is between 30~46mW/cm² . The shorter the wavelength, the stronger the energy, so when blue light (460nm) and infrared light are used together, the light intensity is the highest.

Recommended Use: We recommend using the mask for 15-20 minutes per session, as high light intensity has the potential to damage the skin, especially for people with fair and sensitive skin. We recommend starting with a lower intensity to gradually adapt, thus achieving maximum effect while being safe.

Advantages


Independent LED diodes , instead of "mixed" light with lower efficiency

Higher energy output and larger diodes

Separately controlled infrared light – it's not just decoration

Medical silicone – soft, disinfected, pleasant to the touch

Adjustable modes suitable for all skin types

What does the package include?

  • LumiTech+ LED mask
  • USB charging cable
  • Remote control
  • 2pcs adjustable straps
  • 2pcs silicone eye protectors
  • Storage bag
  • User manual
  • Box

Return and exchange

If the product is not compatible with your skin or you experience sensitivity, you can return it within 14 days of purchase and we will refund the full amount. In case of manufacturing defects, we will replace the product with a new one within 3 months of purchase.

View full details

1

2

3

1

2

3

Clinically proven results


Proven effective for treating various skin problems, thanks to the use of independent LED diodes that provide clean and powerful light.

Wavelengths

90%

Blue light 460nm - Destroys bacteria, helps with acne and inflammation

93%

Yellow light 590nm - Lightens pigmentation, soothes sensitive skin

96%

Red light 630nm - Stimulates collagen production, improves elasticity, reduces wrinkles

99%

Infrared light 850nm - Penetrates deep layers, accelerates regeneration

*Infrared light is invisible to the human eye and when activated, the 4th diode in each block will emit NIR, but to the human eye it will appear as if it is not turned on.

Improved technology and benefits

Independent LEDs

Near Infrared NIR

Improved technology and benefits

Independent LEDs

Independent LEDs are better than composite LEDs.

The reason is that the principle of light emission of composite LEDs is to mix several types of light into one. For example, red light can be mixed with yellow and green light, so you see red light, but it actually contains yellow and green light at the beginning. Each diode of the independent LEDs can only emit one type of light, so the red light you see is truly red, pure and does not contain other colors, which makes the effect better. Our mask uses independent diodes, which are better than composite ones because the light they emit is pure.

Independent LEDs

Independent LEDs are better than composite LEDs.

The reason is that the principle of light emission of composite LEDs is to mix several types of light into one. For example, red light can be mixed with yellow and green light, so you see red light, but it actually contains yellow and green light at the beginning. Each diode of the independent LEDs can only emit one type of light, so the red light you see is truly red, pure and does not contain other colors, which makes the effect better. Our mask uses independent diodes, which are better than composite ones because the light they emit is pure.

Improved technology and benefits

Near Infrared NIR

Infrared light can be used with any other lights together.

Some manufacturers say that their masks also have infrared light (but without a switch). Infrared light is invisible, and our infrared light is controlled separately by the remote control, and you can turn it on or off at any time. The battery capacity is 3000 mAh, and after a full charge, it can be used for a long time.

Near Infrared NIR

Infrared light can be used with any other lights together.

Some manufacturers say that their masks also have infrared light (but without a switch). Infrared light is invisible, and our infrared light is controlled separately by the remote control, and you can turn it on or off at any time. The battery capacity is 3000 mAh, and after a full charge, it can be used for a long time.

Usage steps

1

Remove the LumiTech+ Advanced LED face mask from the box.

2

Place the adhesive strips on both sides of the LED mask.

3

Peel off the protective film from the inside of the LED mask.

4

Connect the mask cable to the remote control. It controls and powers the mask. *Push the cable down firmly

5

Choose your desired time, light and intensity. The programs are 10, 15 and 20 minutes. Also, with the top right button you can activate NiR (near infrared) near infrared light for deeper penetration into the skin layers.

6

Don't forget to put on the silicone eye protectors too.

7

Fasten and use the mask.

1

Remove the LumiTech+ Advanced LED face mask from the box.

2

Place the adhesive strips on both sides of the LED mask.

3

Peel off the protective film from the inside of the LED mask.

4

Connect the mask cable to the remote control. It controls and powers the mask. *Push the cable down firmly

5

Choose your desired time, light and intensity. The programs are 10, 15 and 20 minutes. Also, with the top right button you can activate NiR (near infrared) near infrared light for deeper penetration into the skin layers.

6

Don't forget to put on the silicone eye protectors too.

7

Fasten and use the mask.

Doctor-tested and verified

With a personal touch in skin care - this is Dr. Alex, a doctor graduated in Germany, specializing in dermatology and founder of Al+ Cosmetics . Filled with a clear purpose and a lot of passion for her work with patients. Learn more about Dr. Alex and her vision for a new era in skin care.

Dr. Alex Makendzhieva

Frequently Asked Questions

How many LEDs does the mask have?

The mask has a total of 240 diodes. 60 diode blocks with 4 diodes per block.

Why should I choose LumiTech+ Advanced over other ice masks?

LumiTech+ Advanced LED offers more LEDs, cleaner light emission, tested wavelengths and maximum comfort – all certified to meet strict standards.

CE certificate: Our products have been tested and meet the safety and quality standards set out in European directives, including Directive 2014/30/EU and the relevant standards:

EN 60601-1-2:2015+A1:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3: 2013+A1:2009+A2:2021

ROHS certificate: Our product is also compliant with the ROHS Directive 2011/65/EU and its subsequent amendments (2015/863/EU). It has been tested according to the following standards:

IEC62321-3-1:2013
IEC62321-4:2013+A1:2017
IEC62321-5:2013
IEC62321-6:2015
IEC62321-7-1:2015
IEC62321-7-2:2017
IEC62321-8:2017

Can I use the LED facial mask for more than the recommended time?

Yes, although using it for longer than recommended has not been proven to be more effective.

Does it hurt to use?

The device is 100% painless. It does not generate heat and should not cause any discomfort.

How long will it take for me to see results?

You can expect results in just 4 weeks when used regularly for 10 minutes a day, 3 to 5 times a week. Although effective on its own, you will achieve the best results when used in combination with our face creams or serums.

What side effects can I expect?

If you notice red or itchy skin, discontinue use of the product.

Can I use it during pregnancy or breastfeeding?

The LED Face Mask has not been tested on pregnant or breastfeeding women.

Can I use it if I have melasma?

Melasma (or hormone-induced hyperpigmentation) treatment can be sensitive to certain therapies, including LED therapy. However, depending on the light used in LED masks, it can have different effects.

Red and yellow light (630nm and 590nm):
These lights are primarily used to stimulate collagen production and rejuvenate the skin. They can be helpful in improving skin texture and tone, as well as reducing inflammation, which may be helpful for some people with melasma.

General guidelines for LED therapy for melasma:
Initial Use: If a person has melasma, it is recommended to start with low intensity levels and observe how the skin reacts. A sensitivity test is recommended to avoid unwanted increases in pigmentation.

Combine with depigmentation products: It can be combined with products that have a depigmentation effect (such as hydroquinone or vitamin C), but should be used with caution and under the guidance of a dermatologist.

Consultation with a dermatologist: It is best to consult a dermatologist before starting LED mask therapy, especially if you have active melasma, to ensure that the therapy is safe and does not worsen the condition.

Conclusion:
LED mask treatment can be safe for people with melasma, but should be used with caution, avoiding blue light (460nm) and starting with a lower light intensity. It is recommended to consult a dermatologist to determine the best approach for your individual skin condition.

CONTRAINDICATIONS

DO NOT use this device to treat conditions other than those listed in the indications for use. This device has not been tested for conditions other than those listed and the risk is unknown.

DO NOT use this device if you are pregnant, planning to become pregnant, or breastfeeding. This device has NOT been tested on pregnant or breastfeeding women and therefore the risk to the fetus, newborn, or pregnant women is unknown.

DO NOT use this device if you have lupus erythematosus, photosensitive eczema, or albinism. Using this device system to treat lupus erythematosus, photosensitive eczema, or albinism may cause a severe skin reaction.

DO NOT use this device if you suffer from a photosensitive disorder (sensitivity to light). Using this device and suffering from a photosensitive disorder may cause a severe skin reaction.

DO NOT use the device if you suffer from light-induced headaches.

DO NOT use the device if you suffer from genetic eye diseases.

DO NOT use this device if you are taking medications that can cause photosensitivity. If you use this device and are taking medications that can cause photosensitivity, you may develop a severe skin reaction. Photosensitivity is a common side effect of various medications. These may include some antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any of the medications you are taking, consult your doctor. Other substances not listed above may also cause photosensitivity. Common examples of these substances include St. John's wort, coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (mothballs), petroleum products, bleaching agents found in laundry detergents, and cadmium sulfide (a chemical injected into the skin during tattooing).